Classic
$116.00
Power Accessories
Select Hardware
The following is required for every shelf:
- One connector OR jumper
- One power supply
Available Connectors
CH55s | 12” Pigtail Hardwire connector MALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm male
- Length: 12" pigtail
- Used for Classic, Inset and Floating
CH35a | 12” Pigtail Angle Connector - $4.19
- Angle connector for hardwire
- 12" pigtail
- Required for Classic (back outlet) and Inset LiteShelf
CP35a | 4” Power adaptor to connect low voltage wiring to LiteShelf - $5.02
- Power adaptor to connect low voltage wiring to Inset LiteShelf
- Plug-in
- Input: 5.5mm female
- Output: 3.5mm angle male
- Length: 4"
CJ35a-36 | Plug-in Power adaptor AND 36” long Jumper connector to power the next LiteShelf - $15.04
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (36” long)
- Length: 36"
PGST36 | Plug-in Power supply for up to 86” of LiteShelf - $67.16
- Power Supply that plugs into a wall outlet
- Plug-in
- Input: 2 prong-120v
- Output: 5.5mm male
- For UP TO 86" linear inches of LiteShelf
PGST18 | Plug-in Power supply for up to 43” of LiteShelf - $59.21
- Power Supply that plugs into a wall outlet
- Plug-in
- Input: 2 prong-120v
- Output: 5.5mm male
- For UP TO 43" linear inches of LiteShelf
CJ35a-24 | Plug-in Power adaptor AND 24” long Jumper connector to power the next LiteShelf - $13.96
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (24” long)
- Length: 24"
CE55-120 | 120" Extension Cord DC for Classic & Inset LiteShelf - $18.41
- Low voltage extension cord
- Plug in
- Input: 5.5mm female
- Output: 5.5mm male
- Length: 120" long
- Used for Classic / Inset LiteShelf
CH35s | 12” Pigtail Straight Connector - $4.19
- Straight connector for hardwire
- 12 " pigtail
- Required for Classic (back outlet) and Inset LiteShelf
PGST60 | Plug-in Power supply for up to 144” of LiteShelf - $79.77
- Power Supply that plugs into a wall outlet
- Plug-in
- Input: 3 prong-120v
CE55-39 | 39" Extension Cord DC - $11.41
- Low voltage extension cord
- Plug in
- Input: 5mm female
- Output 5.5mm male
- Length: 39” long
- Used for Classic/Inset LiteShelf
CJ35a-12 | Plug-in Power adaptor AND 12” long Jumper connector to power the next LiteShelf - $12.88
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (12” long)
- Used for Classic and Inset LiteShelf
- Length: 12" long
L55 | 12” Pigtail Hardwire connector FEMALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm female
- Length: 12" pigtail
- Used for Classic, Inset and Floating
CP35a | 4” Power adaptor to connect low voltage wiring to LiteShelf - $5.02
- Power adaptor to connect low voltage wiring to Inset LiteShelf
- Plug-in
- Input: 5.5mm female
- Output: 3.5mm angle male
- Length: 4"
PGST36 | Plug-in Power supply for up to 86” of LiteShelf - $67.16
- Power Supply that plugs into a wall outlet
- Plug-in
- Input: 2 prong-120v
- Output: 5.5mm male
- For UP TO 86" linear inches of LiteShelf
Optional Connections
CH55s | 12” Pigtail Hardwire connector MALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm male
- Length: 12" pigtail
- Used for Classic, Inset and Floating
CH35a | 12” Pigtail Angle Connector - $4.19
- Angle connector for hardwire
- 12" pigtail
- Required for Classic (back outlet) and Inset LiteShelf
CP35a | 4” Power adaptor to connect low voltage wiring to LiteShelf - $5.02
- Power adaptor to connect low voltage wiring to Inset LiteShelf
- Plug-in
- Input: 5.5mm female
- Output: 3.5mm angle male
- Length: 4"
CJ35a-36 | Plug-in Power adaptor AND 36” long Jumper connector to power the next LiteShelf - $15.04
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (36” long)
- Length: 36"
CJ35a-24 | Plug-in Power adaptor AND 24” long Jumper connector to power the next LiteShelf - $13.96
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (24” long)
- Length: 24"
CE55-120 | 120" Extension Cord DC for Classic & Inset LiteShelf - $18.41
- Low voltage extension cord
- Plug in
- Input: 5.5mm female
- Output: 5.5mm male
- Length: 120" long
- Used for Classic / Inset LiteShelf
CH35s | 12” Pigtail Straight Connector - $4.19
- Straight connector for hardwire
- 12 " pigtail
- Required for Classic (back outlet) and Inset LiteShelf
CJ35a-12 | Plug-in Power adaptor AND 12” long Jumper connector to power the next LiteShelf - $12.88
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (12” long)
- Used for Classic and Inset LiteShelf
- Length: 12" long
CE55-39 | 39" Extension Cord DC - $11.41
- Low voltage extension cord
- Plug in
- Input: 5mm female
- Output 5.5mm male
- Length: 39” long
- Used for Classic/Inset LiteShelf
L55 | 12” Pigtail Hardwire connector FEMALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm female
- Length: 12" pigtail
- Used for Classic, Inset and Floating
Available Jumpers
CJ35a-36 | Plug-in Power adaptor AND 36” long Jumper connector to power the next LiteShelf - $15.04
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (36” long)
- Length: 36"
CJ35a-24 | Plug-in Power adaptor AND 24” long Jumper connector to power the next LiteShelf - $13.96
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (24” long)
- Length: 24"
CJ35a-12 | Plug-in Power adaptor AND 12” long Jumper connector to power the next LiteShelf - $12.88
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (12” long)
- Used for Classic and Inset LiteShelf
- Length: 12" long
Available Jumpers
CH55s | 12” Pigtail Hardwire connector MALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm male
- Length: 12" pigtail
- Used for Classic, Inset and Floating
CP35a | 4” Power adaptor to connect low voltage wiring to LiteShelf - $5.02
- Power adaptor to connect low voltage wiring to Inset LiteShelf
- Plug-in
- Input: 5.5mm female
- Output: 3.5mm angle male
- Length: 4"
CJ35a-36 | Plug-in Power adaptor AND 36” long Jumper connector to power the next LiteShelf - $15.04
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (36” long)
- Length: 36"
CJ35a-24 | Plug-in Power adaptor AND 24” long Jumper connector to power the next LiteShelf - $13.96
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (24” long)
- Length: 24"
CE55-120 | 120" Extension Cord DC for Classic & Inset LiteShelf - $18.41
- Low voltage extension cord
- Plug in
- Input: 5.5mm female
- Output: 5.5mm male
- Length: 120" long
- Used for Classic / Inset LiteShelf
CJ35a-12 | Plug-in Power adaptor AND 12” long Jumper connector to power the next LiteShelf - $12.88
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (12” long)
- Used for Classic and Inset LiteShelf
- Length: 12" long
CE55-39 | 39" Extension Cord DC - $11.41
- Low voltage extension cord
- Plug in
- Input: 5mm female
- Output 5.5mm male
- Length: 39” long
- Used for Classic/Inset LiteShelf
L55 | 12” Pigtail Hardwire connector FEMALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm female
- Length: 12" pigtail
- Used for Classic, Inset and Floating
Available Jumpers
CJ35a-36 | Plug-in Power adaptor AND 36” long Jumper connector to power the next LiteShelf - $15.04
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (36” long)
- Length: 36"
CJ35a-24 | Plug-in Power adaptor AND 24” long Jumper connector to power the next LiteShelf - $13.96
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (24” long)
- Length: 24"
CE55-120 | 120" Extension Cord DC for Classic & Inset LiteShelf - $18.41
- Low voltage extension cord
- Plug in
- Input: 5.5mm female
- Output: 5.5mm male
- Length: 120" long
- Used for Classic / Inset LiteShelf
CJ35a-12 | Plug-in Power adaptor AND 12” long Jumper connector to power the next LiteShelf - $12.88
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (12” long)
- Used for Classic and Inset LiteShelf
- Length: 12" long
CE55-39 | 39" Extension Cord DC - $11.41
- Low voltage extension cord
- Plug in
- Input: 5mm female
- Output 5.5mm male
- Length: 39” long
- Used for Classic/Inset LiteShelf
Available Jumpers
CJ35a-36 | Plug-in Power adaptor AND 36” long Jumper connector to power the next LiteShelf - $15.04
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (36” long)
- Length: 36"
CJ35a-24 | Plug-in Power adaptor AND 24” long Jumper connector to power the next LiteShelf - $13.96
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (24” long)
- Length: 24"
CE55-120 | 120" Extension Cord DC for Classic & Inset LiteShelf - $18.41
- Low voltage extension cord
- Plug in
- Input: 5.5mm female
- Output: 5.5mm male
- Length: 120" long
- Used for Classic / Inset LiteShelf
CJ35a-12 | Plug-in Power adaptor AND 12” long Jumper connector to power the next LiteShelf - $12.88
- Power adaptor to connect to Classic and Inset LiteShelf AND Jumper connector to power the next LiteShelf
- Plug in (Rear outlet in Classic)
- Input: 5.5mm female
- Output: 3.5mm angle male (6" long)/5.5mm male (12” long)
- Used for Classic and Inset LiteShelf
- Length: 12" long
CE55-39 | 39" Extension Cord DC - $11.41
- Low voltage extension cord
- Plug in
- Input: 5mm female
- Output 5.5mm male
- Length: 39” long
- Used for Classic/Inset LiteShelf
CS55-4 | 1 to 4 splitter - $19.02
- Low voltage Splitter
- Plug-in
- Rear outlet or Bottom outlet
- Input: 5.5mm female
- Output: 5.5 male (x2 for Inset)
- Length: 12"
CS55-2 | 1 to 2 splitter - $11.91
- Low voltage Splitter
- Plug-in
- Rear outlet or Bottom outlet
- Input: 5.5mm female
- Output: 5.5 male (x2 for Inset)
- Length: 12"
Available Jumpers
CE55-120 | 120" Extension Cord DC for Classic & Inset LiteShelf - $18.41
- Low voltage extension cord
- Plug in
- Input: 5.5mm female
- Output: 5.5mm male
- Length: 120" long
- Used for Classic / Inset LiteShelf
CE55-39 | 39" Extension Cord DC - $11.41
- Low voltage extension cord
- Plug in
- Input: 5mm female
- Output 5.5mm male
- Length: 39” long
- Used for Classic/Inset LiteShelf
CS55-4 | 1 to 4 splitter - $19.02
- Low voltage Splitter
- Plug-in
- Rear outlet or Bottom outlet
- Input: 5.5mm female
- Output: 5.5 male (x2 for Inset)
- Length: 12"
CS55-2 | 1 to 2 splitter - $11.91
- Low voltage Splitter
- Plug-in
- Rear outlet or Bottom outlet
- Input: 5.5mm female
- Output: 5.5 male (x2 for Inset)
- Length: 12"
Available Jumpers
CE55-120 | 120" Extension Cord DC for Classic & Inset LiteShelf - $18.41
- Low voltage extension cord
- Plug in
- Input: 5.5mm female
- Output: 5.5mm male
- Length: 120" long
- Used for Classic / Inset LiteShelf
CE55-39 | 39" Extension Cord DC - $11.41
- Low voltage extension cord
- Plug in
- Input: 5mm female
- Output 5.5mm male
- Length: 39” long
- Used for Classic/Inset LiteShelf
Available Power Connectors
PGST36 | Plug-in Power supply for up to 86” of LiteShelf - $67.16
- Power Supply that plugs into a wall outlet
- Plug-in
- Input: 2 prong-120v
- Output: 5.5mm male
- For UP TO 86" linear inches of LiteShelf
PGST60 | Plug-in Power supply for up to 144” of LiteShelf - $79.77
- Power Supply that plugs into a wall outlet
- Plug-in
- Input: 3 prong-120v
Available Power Supply
CH55s | 12” Pigtail Hardwire connector MALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm male
- Length: 12" pigtail
- Used for Classic, Inset and Floating
CH35a | 12” Pigtail Angle Connector - $4.19
- Angle connector for hardwire
- 12" pigtail
- Required for Classic (back outlet) and Inset LiteShelf
CH35s | 12” Pigtail Straight Connector - $4.19
- Straight connector for hardwire
- 12 " pigtail
- Required for Classic (back outlet) and Inset LiteShelf
L55 | 12” Pigtail Hardwire connector FEMALE - $4.19
- Adaptor to connect Hardwire to Jumper Connector OR to connect Hardwire to Floating LiteShelf
- Hardwire Rear or Bottom outlet
- Input: Bare Wire
- Output: 5.5mm female
- Length: 12" pigtail
- Used for Classic, Inset and Floating
Available Power Supply
PPWM60 | DIMMABLE power supply for Hardwiring up to 144” of LiteShelf - $135.15
- Power Supply that is wired directly into 120 house wiring
- Hardwire
- 0-10v dimming (requires third party dimmer).
- Input: Bare Wire-120v
- Output: Bare Wire
- For UP TO 144" linear inches of LiteShelf
PLPV100 | Power supply for Hardwiring up to 240” of LiteShelf - $92.20
- Power Supply that is wired directly into 120 house wiring
- Hardwire
- Input: Bare Wire-120v
- Output: Bare Wire
- For UP TO 240" linear inches of LiteShelf
PAPV36 | Power supply for Hardwiring up to 86” of LiteShelf - $45.64
- Power Supply that is wired directly into 120 house wiring
- Hardwire
- Input: Bare Wire-120v
- Output: Bare Wire
- For UP TO 86" linear inches of LiteShelf
PAPV12 | Power supply for Hardwiring up to 28” of LiteShelf - $23.51
- Power Supply that is wired directly into 120 house wiring
- Hardwire
- Input: Bare Wire-120v
- Output: Bare Wire
- For UP TO 28" linear inches of LiteShelf
PLPV150 | Power supply for Hardwiring up to 360” of LiteShelf - $126.17
- Power Supply that is wired directly into 120 house wiring; Hardwire
- Input: Bare Wire-120
- Output: Bare Wire
- For UP TO 360" linear inches of LiteShelf
Available Power Connectors
PGST18 | Plug-in Power supply for up to 43” of LiteShelf - $59.21
- Power Supply that plugs into a wall outlet
- Plug-in
- Input: 2 prong-120v
- Output: 5.5mm male
- For UP TO 43" linear inches of LiteShelf
Classic LiteShelf fits into any closet, or wherever standard shelf boards are used.
- Classic is available in 6 standard sizes, finished in frosty white or unfinished.
- Custom sizes up to 16” deep x 48” wide, and as small as 4" by 8" can be ordered here: Custom Classic Finished or Custom Classic Unfinished.
- There are either rear jack (closet professional) or bottom jack (for the homeowner) options.
- Like a shelving board, Classic can be covered with any HPL (Formica/Wilsonart) or wood veneer, and edge-banned to match.
- Classic can rest on regular closet pins.
- Classic can also be cut for 12.5 mm cam connectors.
| MODEL | Classic |
| OUTPUT | 250 Lumens per Linear Foot |
| Candela at 18” | 40 cd |
| POWER CONSUMPTION | 5 watts per Linear Foot |
| THICKNESS | 0.75" +/- 0.03” |
| OPERATING VOLTAGE | 24Vdc |
| DIMMABILITY | Inline Dimmer (not included) |
| OUTPUT COLOR | 3200k or 4200k |
| WEIGHT | 4.3 Lbs (1.95 kg) / SqFt |
| MIN. SIZE | 4 x 8” (102 x 203 mm) |
| MAX. SIZE | 16” x 48” (406 x 1219 mm) |
| OPERATING LIFESPAN | 50, 000 to 70,000 HOURS (L70) |
| WARRANTY | 5 YEAR WARRANTY |
| REAR INPUT CONNECTOR | 1.35mm x 3.5mm PLUG n PLAY |
| INPUT JACK LOCATION | 3” (76 mm) off left edge |
| or | |
| BOTTOM CONNECTOR | 2.5mm x 5.5mm PLUG n PLAY |
| INPUT JACK LOCATION | 1.25” (76 mm) off left/rear edge |
| OPERATING TEMP | -30°C (-22 °F) ~ +40 °C (+104 °F) |
| POWER SUPPLY SPECS | AVAILABLE UPON REQUEST |